Builders & post-renovation cleans
Builders clean, Brisbane
We clean new builds, renovations and multi-unit developments across greater Brisbane to handover standard — dust, debris, paint and silicone overspray gone, fixtures and glass detailed, ready for inspection.
Brisbane
Real jobs, real results
Brisbane metro sits in Zone 2 — a modest travel fee applies (shown upfront on every quote), and it's our highest-volume region for multi-dwelling and commercial fitout work.
Where we work
Suburbs & areas we cover across Brisbane
Brisbane CBD & inner city
New Farm, West End, Paddington, South Brisbane and the CBD itself. Building activity here splits two ways: apartment and mixed-use towers handed over floor by floor, and character homes — Queenslanders and workers' cottages — being raised, built under or extended at the back. Tight streets and limited parking are normal, so tell us about site access when you request a quote.
Northside
Chermside, Nundah, Aspley and out towards Albany Creek. Mostly post-war homes getting a full renovation, plus townhouse infill on subdivided blocks. It is the closest part of Brisbane to our Margate base, which helps when a handover date moves.
Southside & bayside
Carindale, Mount Gravatt, Sunnybank and across to Wynnum and Manly. Knockdown-rebuilds on established blocks are the common job — a new double-storey home with a lot of glass, stairs and hard flooring, all of which show construction dust the moment the light hits them.
Western suburbs & the Ipswich corridor
Indooroopilly and the western suburbs through to Ipswich, Springfield and Ripley. The corridor is one of the fastest-growing parts of South East Queensland and the work follows: project homes and townhouse stages in new estates, handed over in runs rather than one at a time. Per-unit trade pricing suits that kind of program.
The scope
What a builders clean covers in Brisbane
A builders clean in Brisbane takes a finished build from trade-complete to inspection-ready: construction dust out of every room, cupboard, vent and light fitting; paint, silicone and adhesive overspray lifted from glass, tiles and benchtops; stickers and protective film off new fixtures; tracks, skirting and windows detailed; floors finished last.
In Brisbane's renovated character homes that means the awkward parts too — VJ walls, fretwork, casement windows and old timber floors that hold dust in every gap. In apartments it is the same scope, repeated unit by unit to one standard.
The full scope is in the room-by-room builders clean checklist, the cost guide covers what moves the price, and the clean stages guide explains which pass your job needs.
Local detail
Brisbane renovations and knockdown-rebuilds: where the dust goes
Most Brisbane renovation dust is plaster and timber. Raising a Queenslander, building in underneath and sanding original floors puts fine dust through the whole house, including the rooms nobody worked in. It settles on top of door frames, inside wardrobes and in ceiling fans, and it keeps settling after the sanders have left.
That is why timing matters more than effort. Book the clean for after the last dust-making trade, not before it, and allow for a sparkle pass just ahead of the client walkthrough if there is a gap between the two.
On knockdown-rebuilds and unit developments the pressure is the program rather than the dust. Those jobs are quoted per square metre or per unit against your handover dates, and a photo-backed defect report can be added so items found at practical completion are not mistaken for an incomplete clean.
FAQ
Brisbane — common questions
Which parts of Brisbane do you cover?
All of metro Brisbane — the CBD and inner suburbs such as New Farm, West End and Paddington, the Northside around Chermside, the Southside around Carindale, the western suburbs through Indooroopilly, and the corridor out to Ipswich. Brisbane is travel Zone 2, so a modest travel fee applies and is shown on every quote before you commit.
Do you clean renovated Queenslanders and character homes in Brisbane?
Yes — that is what a post-renovation clean is for. Plaster and floor-sanding dust travels through the whole house, so the clean covers every room, not just the ones the trades worked in: the tops of frames, inside cupboards, ceiling fans, window tracks and the gaps in old timber floors.
Can you handle apartment and townhouse handovers in inner Brisbane?
Yes. Brisbane is our highest-volume region for multi-dwelling work. Programs are cleaned unit by unit to your handover schedule and priced per unit or per square metre, so the rate is the same from the first unit to the last. Tell us about lift access, loading zones and parking when you request the trade quote.
Is there a travel fee for Brisbane jobs?
Yes, a modest one. We are based in Margate, in Moreton Bay, and metro Brisbane is Zone 2. The travel component is itemised on the quote rather than folded into the rate, so you can see exactly what it is before you book.
How do I get a price for a builders clean in Brisbane?
Homeowners and renovators can use the online instant quote — an estimate from room count and location that we confirm after a look at the scope. Builders, project managers and developers should request a trade quote with floor area or unit count and program dates; sqm-based and staged pricing usually comes back within a few hours.
We also service: